
SWK 360 A1
■
40
│
GB
│
IE
│
NI
Accessories
Using the mounts
The camera is supplied with various mounts which allow the use of the camera different situations.
NOTE
►
You can use a Phillips screwdriver to unscrew all the screws.
Helmet mount
DANGER
►
The double-sided tape may not be used on a protective helmet as it may impair the
protective effect of the helmet.
NOTE
►
The helmet mount is only suitable for helmets with vents.
You will need the following accessories to install the helmet mount :
+
+
+
♦
Undo the screw on the helmet mount and remove it completely from the mount.
♦
Push the plug connector to ball joint adapter into the socket.
♦
Put the screw back into the mount and then tighten it again.
♦
Undo the screw cap on the plug connector to ball joint adapter .
♦
Push the ball joint on the ball adapter into the screw cap on the plug connector to ball joint
adapter .
♦
Retighten the screw cap on the plug connector to ball joint adapter .
♦
First guide the strap of the helmet mount through the vents on the helmet and then through
the clamps (see figure 13).