SilverCrest STV 45 E1
English - 9
8. Initial use
8.1 Switching the fan on and off
Proceed as follows to put the fan into operation:
•
Select a location that meets the safety instructions in
Section 5
.
•
Operate the fan on a flat, stable surface.
•
Insert the plug into a properly installed socket.
•
Turn the power supply on by setting the
rotary switch (2) to the
ON
position.
•
Turn the power supply off by setting the
rotary switch (2) to the
OFF
position.
8.2 Configuring the fan speed
•
Fan speed low: Press button
1
(6) until it locks in place.
•
Fan speed medium: Press button
2
(4) until it locks in place.
•
Fan speed high: Press button
3
(3) until it locks in place.
•
Stop the ventilation by pressing the
OFF
button (7).
8.3 Configuring the TIMER
The TIMER enables you to set a running time between 0 and 120 minutes.
•
Turn the TIMER on by setting the rotary
switch (2) to any position between 0 and
120 minutes. This will also turn the
power supply on.
•
Please note that the TIMER cannot be set
to a precise minute.
•
Turn the TIMER off by turning the rotary
switch (2) to the
OFF
position.
