SilverCrest STV 45 E1
8 - English
•
Never operate the
product
near highly flammable materials,
such as curtains, drapes etc. Keep the
product
at least 50 cm
away from flammable and combustible materials.
The
product
must not be exposed to direct sources of heat (e.g.,
heaters), direct sunlight or strong artificial light. Also avoid
contact with splashing and dripping water as well as aggressive
liquids. Do not operate the
product
near water. In particular, the
product
must never be immersed (do not place any objects filled
with liquids, e.g., vases or drinks, on the
product
). Also make sure
that the
product
is not exposed to excessive shocks and
vibrations. Furthermore, no foreign bodies should penetrate into
the device.
6. Copyright
All contents of this operating manual are subject to copyright law and are provided to the user solely
as a source of information. Any form of copying or reproduction of data and information without the
express written permission of the author is prohibited. This also concerns commercial use of the
content and data. The text and illustrations correspond to the technical standards at the time of
printing. Subject to alterations.
7. Before initial use
7.1 Unpacking
•
Take the product out of the packaging.
•
Completely remove all packaging materials.
•
Check the package contents for completeness. Contact Service immediately in case of missing
components.
7.2 Assembly
•
Figure A:
Put the front half (9) and the back half (10) of the base (8) together.
•
Figure B:
Insert the thread on the bottom of the tower fan (1) through the base (8). Make
sure that the power cable (13) is pinned in the power cable opening (11) so that the opening
is completely filled and the power cable (13) is not twisted. To do this, insert the power cable
(13) by rotating it slightly under the plastic strip (12) in the power cable opening (11). Then,
screw the fastening nut (14) onto the thread. Hand-screw the fixing nut (14) to tighten it.
