SilverCrest SSRM 10 A1
22 - English
After approx. 5 minutes, the alarm tone starts again. To switch
off the alarm tone, briefly press the "On/Standby" button (6).
Storage when not in use
If you will not be using the scan radio for an
extended period of time, remove the batteries to
avoid leakage.
Store the clean device in a dry, cool location.
Troubleshooting
No sound / no reception
Check whether the earphones (B) are inserted correctly into
the earphone jack (8).
Check whether the volume is set too low.
Change your location to check whether the reception
improves.
Check the capacity of the batteries (C), and replace them if
necessary with new batteries of the same type. Please pay
particular attention to the section "Inserting the batteries".
Nothing indicated on the display
Check whether the batteries are empty or inserted incorrectly.
Insert the batteries correctly or replace them if necessary with
new batteries of the same type. Please pay particular attention
to the section "Inserting the batteries".
