SilverCrest SSRM 10 A1
16 - English
The setting has no effect on the volume of the buzzer
for the alarm clock function. The buzzer volume is
always the same.
Automatic station scan with auto store function
To receive radio stations, it is necessary for the
supplied earphones (B) to be connected to the
earphone jack. The earphone cable serves as a
receiving aerial.
The most convenient way to search for stations and save them is
the automatic station scan with automatic saving of stations (auto
store function).
Switch on the scan radio with the "On/Standby" button (6).
Press the "MODE" button (3) for approx. 2 seconds to start the
automatic station scan. The automatic station scan always
starts at the lowest frequency (87.5MHz).
The scan radio now searches the entire frequency range for
stations with strong signals. "SCAN" (14) flashes on the
display (1). The "FM" symbol (11) lights up and goes out
briefly once a station has been found and the station preset
that was used is shown. "PRESET" (22) is displayed
permanently after the first station found has been saved.
The first 20 stations found are stored directly in the presets 01
to 20 and saved. If all station presets are occupied, the scan is
cancelled and the preset station "01" is played.
The scan can be cancelled at any time by pressing any button.
