Silvercrest SLSN 3 A1, Инструкция по эксплуатации и правила безопасности

Страница: 38 / 148

SilverCrest SLSN 3 A1
36 - English

For a more intensive clean, you can remove the shaver head (6) from the lady shaver. Using your
thumb and forefinger, press the unlock buttons (5) on both sides of the shaver head (6), pulling it
upwards to remove.

The head part of the lady shaver and the removed shaver head (6) can be rinsed off under running
water. Then dry the parts thoroughly. Do so carefully to prevent damaging the shaving foil (2).

Then place the shaver head (6) back on in reverse; the trimmer locking mechanism (4) must be
positioned above the ON/OFF switch (7) when doing so. Slide the shaver head (6) downwards
until you hear it click into place.
After cleaning, add a few drops of acid-free oil (for example, sewing machine oil) to the
trimmer (3) and the shaving film (2) every so often. Leave the lady shaver running for a few
seconds without using it to allow the oil to spread out evenly. Then wipe off any excess oil with
a soft cloth.
9.2 Maintenance
The shaver head (6) of the lady shaver is subject to constant wear resulting from use.
DANGER!
Stop using the lady shaver if you notice that the shaver head (6) and/or shaving
foil (2) has become damaged. Risk of injury!
The shaver head (6) must be replaced if...

you see any damage

you notice slight pulling when shaving or the shave is not as thorough as usual

it has become worn through use, usually after a year at the latest
The shaver head (6) is subject to wear and is not covered by the guarantee.
A new shaver head (6) can be ordered online from the following website:
shop.targa.de