Silvercrest SL 80/2 100CI, Инструкции по эксплуатации и безопасности

Страница: 21 / 104

- 18 -
Connection with a YUV cable (YPbPr)
If you own a TV set with YUV connections, you can connect it via the SCART
socket “TV“ to the receiver. For this purpose, you need a YUV cable with YUV
connectors at one and a SCART connector with YUV element at the other
extreme.
Connect the SCART connector of the YUV cable to the SCART socket “TV“
on the receiver.
Connect the YUV cable (not included in the scope of supply) to the YUV
connectors of the TV set (Fig. 1).
You can even connect a YUV cable directly to the YUV sockets of the receiver
with the TV set.
Connect the YUV cable to the YUV connectors of the TV set.
Connect the YUV cable to the YUV connectors of the TV set (Fig. 2).
Follow the indications in the operating manual of the TV set.
As the YUV cable does not send an audio signal to the TV set, you must
connect your receiver with a stereo system to hear the sound.
For this purpose, use a Cinch cable and insert the Cinch connector in the
“AUDIO-R“ and “AUDIO-L“ sockets of the receiver.
Alternatively, you can also connect an audio digital receiver to your receiver
to get a 5-channel audio transmission. Use the digital audio outputs
"COAXIAL" or "OPTICAL" for this purpose. The corresponding connection
diagram can be found on the following pages.
Caution!
Never connect the Phono input of your stereo system to the receiver; it
may damage your stereo system.
Strictly follow instructions for connecting the Cinch cable
given in the operating manual of your stereo system.
This YUV output is a high-quality output especially made for flat
screens, plasma TV sets or beamers. Follow the indications in the
operating manual of the connected devices.