Silvercrest SIBT 16 A1, Руководство по эксплуатации

Страница: 21 / 58

SIBT 16 A1
■ 16
│
GB
│
IE
│
NI
Pairing the earbuds with a Bluetooth ® device
Before you can use the earbuds , you must pair them with a com-
patible
Bluetooth
® device.
♦ Make sure that the earbuds are switched off and the
Bluetooth ®
device is switched on.
♦ Set the
Bluetooth ®
appliance so that it scans for other
Bluetooth ®
devices. A detailed description of how to do this can be found in
the operating instructions for your
Bluetooth ®
device.
♦ Press and hold the multifunction switch on the left and right
earbuds for 6 seconds to turn the earbuds on and activate
the
Bluetooth ®
function. You will hear the message "Power on –
Connected Left channel / Right channel" and the operating/
charging LED on the left earbud flashes alternately red and
blue. At the same time, the operating/charging LED on the right
earbud flashes every 5 seconds. The left earbud is the main
headphone and establishes the
Bluetooth ®
connection with the
Bluetooth
® device.
♦ Select
SIBT 16 A1
from the list of found devices on your
Bluetooth ®
device to pair the two devices. You will hear the message "Pairing
successful – Connected" if the pairing was successful.
NOTE
► If you do not establish a connection between the earbuds
and your
Bluetooth
® device within 2 minutes, you will hear the
message "Power off" and the earbuds switch off automati-
cally. In this case, you will have to switch the earbuds back
on again before starting the pairing process again.