Silvercrest SGW 860 A1, Быстрый старт

Страница: 50 / 277

50 - English
8.3. Filling with water manually
Before adding water, press the button (18) to switch on the dishwasher.
As an alternative to using the water supply via a water tap, you can also fill
up the appliance with water manually (see Fig. E ).
It is always necessary to fill up the appliance as soon as the acoustic signal sounds.

Fill the measuring container (6) with clean tap water.

Remove the water tank cover (12).

Fill the water tank with water (min./max. 5 litres). Take care to pour the water into the
water tank opening slowly and carefully to avoid splashing.
An acoustic signal will sound as soon as the water tank is full.

Put on the water tank cover.
8.4. Connecting the water outlet
Insert the drain hose with the connection for the water outlet (22) to the back of the appli-
ance and secure it using a clamp (see
Fig. F ).
You can connect the outlet hose in different ways:
− connect the hose to a special connection on the outlet pipe,
− feed the hose into an outlet pipe,
− or run into a sink/container.
8.4.1. Connecting the hose with the siphon on the sink

Connect the drain hose with the outlet pipe siphon (for washing machines) underneath
the sink (see
Fig. G ). Ensure that the drain hose is inclined sufficiently. The appliance is
to be positioned at least 4 cm higher than the drain.
In case of connection to a siphon, an adapter is required for the connection to
the drain hose depending on the siphon design. This is available from special-
ist retailers.
Fig. H