Silvercrest SDR 1100 B2, Руководство по эксплуатации, Страница: 15 / 58

■ 12 │
GB
│
IE
│
NI
│
CY
SDR 1100 B2
Areas of application
You can clean either by using steam directly from the steam nozzle
6
or you
can fit an accessory .
■ Do not use an accessory if you want to clean items such as toilets and sinks,
taps and drains, windows, furniture, fabrics, shutters or mirrors .
You can easily remove water and dissolved dirt from smooth surfaces after
cleaning using the squeegee attachment
13
.
NOTE
► The closer you hold the steam nozzle
6
to the surface to be cleaned, the
better the effect . The steam pressure and temperature are at their highest
directly after leaving to the steam nozzle
6
.
► Stubborn stains and dirt must be soaked with water beforehand .
■ Use the angle nozzle
12
for tight corners or joints, or hard-to-reach places .
■ Use the round brush
11
for stubborn soiling, for example, on wheel rims .
Fitting/removing attachments
WARNING! RISK OF INJURY!
► Always remove the plug from the mains power socket before you fit/remove
an attachment .
► Wait until the appliance has cooled down before you fit/remove an attach-
ment .
► Wait until all of the steam has dissipated before you fit/remove an attach-
ment .
Extension hose
♦ Push the extension hose
9
on to the steam nozzle
6
as far as the stop .
The marking line on the extension hose
9
and the marking
line on the appliance must be aligned with each other
(see fold-out page Figure A) .
♦ Turn anticlockwise until both marking lines on the extension hose
9
are
aligned with both marking lines on the appliance . The extension hose
9
remains locked in this position (see fold-out page Figure B) .
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position . This is, however, not possible with the
extension hose
9
.
■ The extension hose
9
is removed in the reverse order .