
■
10
│
GB
│
IE
│
NI
│
CY
SDR 1100 B2
If there is no more water in the water tank
3
, no steam will come out when the
steam lever is pressed . The water tank must be filled as follows:
♦
Remove the plug from the mains power socket .
♦
Wait about 10 seconds .
♦
Slowly open the safety valve
8
. Before fully opening up the valve, wait
a few seconds until the hissing of the water vapour stops .
♦
Fill the water tank
3
with water .
♦
Reclose the safety valve
8
.
If the mains water at your locality is rated as hard, it is recommended that you
mix the mains water with distilled water . Otherwise, the appliance could calcify
prematurely and clog the steam nozzle
6
.
To extend the optimal functioning of the appliance, mix the mains water with
distilled water as per the following table .
Water hardness
Ratio of distilled water
to mains water
very soft/soft
0
medium
1:1
hard
2:1
very hard
3:1
The water hardness level of your tap water can be queried at your local water
works .
Содержание SDR 1100 B2
Страница 3: ...A B ...