SBT 1.5 B1
■
10
│
GB
│
IE
│
NI
NOTE
►
If...
– the shaving result deteriorates noticeably,
– the shave takes much longer than usual,
– there is any visible damage on the shaving head
,
... the shaving head
needs to be replaced.
►
You can order replacement shaving heads
from our service
department (see section "Ordering replacement parts").
Removing and cleaning the shaving head
To clean the shaving head
thoroughly, you need to remove the
shaving head
from the housing:
1) Remove the protective cap
(if fitted) from the housing.
2) Turn the shaving head
in the opposite direction to the arrow
until the marking on the shaving head
points to the O
marking on the housing.
3) Pull the shaving head
off the housing.
Clean the shaving head
using the supplied cleaning
brush
and/or rinse the shaving head
under running
water.
4) Dry off the shaving head
thoroughly if necessary.
5) Also remove any remaining hairs using the cleaning brush
.
6) Replace the shaving head
on the housing and turn the shav-
ing head
in the direction of the arrow
until the marking
on the shaving head
points to the marking on the housing.
7) Replace the protective cap
on the housing.
Dismantling the shaving head
You can also dismantle the shaving head
if you want to clean it
particularly thoroughly:
Содержание SBT 1.5 B1
Страница 3: ......
Страница 21: ...SBT 1 5 B1 18 GB IE NI ...
