Silvercrest SBS 60 B2, Инструкции по эксплуатации и безопасности

Страница: 18 / 67

17 GB
Note: Usually, audio devices remember the
identification of the device . In this case, it may not
be necessary to establish the connection manually
again if the Bluetooth
®
function is activated .
˜
USB operation
Plug the USB device into the USB socket
15
.
Press the button
2
on the product
repeatedly or press the USB button on the
remote control to select USB mode . The
light
10
is flashing in orange .
This USB port can read MP3 file .
During playback:
- To pause or resume play, press the /
PAIR
button on the remote control .
- To skip to the previous / next file, press the
, buttons on the remote control .
- Press and hold the , buttons on the
remote control to perform fast forward /
reverse playback . Release the button to
resume normal playback .
˜
Charging other devices via
USB port
This USB port charge other devices, if those
devices have charging function .
˜
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself . If you encounter problems when
using this product, check the following points
before requesting service .
=
Fault
= Action
No function / no display
Ensure the mains cable is connected securely .
Make sure that the product is switched on .
The remote control does not function
Use the remote control near the product .
Point the remote control at the remote control
sensor
5
on the product .
Replace the battery in the remote control with
a new one .
Remove any obstacles between the remote
control and the product .
Loud hum or noise is heard
Check if audio in plugs are well connected
The product does not respond when
pressing any buttons
An electrostatic discharge has occurred,
which blocks the soundbase . Switch off the
soundbase on the main switch
11
for approx .
5 seconds and then switch it on again . You
can use the soundbase as usual now .
No sound output
Make sure that the product is not
muted . Press the MUTE button
21
or the
VOL +/– button
4
/
20
to resume normal
listening .
Ensure the audio setting of the input source
(e . g . TV, game console, DVD player, etc .) is
set to PCM mode .