Silvercrest SBS 60 B2, Инструкции по эксплуатации и безопасности

Страница: 15 / 67

14 GB
˜
Connection to power socket
Attention! Risk of product damage!
Ensure that the power supply voltage
corresponds to the voltage printed on the
back of the product .
Connect the AC power cord to the power
socket
12
on the product and a wall outlet .
Notes:
Ensure all connections are connected before
connecting to the mains power socket .
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time .
˜
Using the product
˜
Standby / ON
After connecting the soundbase to a wall
outlet, switch the product on using the
I/O
switch
11
. The soundbase is in standby mode
now, as indicated by the red LED display .
Press the button
1
/
18
on the main
device or on the remote control to switch the
main unit ON .
Press the button
1
/
18
again to switch
the product back to standby mode . The LED
display lights up red .
Disconnect the mains plug from the wall
socket or switch the I/O switch
11
on the
rear of the product to switch the product off
completely .
Note:
When turning the product on again, it will
continue with the same mode that was used
prior to turning off the product last time .
If the product is idle for over 15 minutes, the
product will automatically switch to Standby
mode .
˜
Select modes
Press the button
2
repeatedly on the product
or press the AUX1, AUX2, BT (Bluetooth
®
),
OPTICAL, COAXIAL, HDMI ARC, USB buttons on
the remote control to select the desired mode .
Indicator Mode
1 Red
Standby
2 Orange / flash AUX1 / AUX2
3 Blue
BLUETOOTH
®
4 Orange / flash
OPTICAL /
COAXIAL
5 Orange / flash HDMI ARC / USB