7
GB
state has been reached, the charging in-
dicator light
charge
|
11
is lit green.
Battery signals: charging
indicator light charge
|
11
-
Dental water jet
|
12
on battery charger
|
15
:
charging indicator light
charge
|
11
is lit
green: the battery is fully charged.
-
Dental water jet
|
12
on battery charger
|
15
:
charging indicator light
charge
|
11
is lit
red: the battery is being charged.
-
Dental water jet
|
12
switches itself off:
charging indicator light
charge
|
11
flashes red. Charge the battery.
-
The battery becomes weak during use:
charging indicator light
charge
|
11
flashes red. Charge the battery.
7. Nozzle attachments
The items supplied include 2 nozzle attach-
ments
|
2
.
The various marking rings
|
3
allow you to as-
sign the nozzle attachments
|
2
to different
family members.
The nozzle attachments
|
2
can be inserted
into the holders
|
13
of the battery char-
ger
|
15
for storage.
Attaching/removing the nozzle
attachment
• Take a nozzle attachment
|
2
and insert it
from above into the holder
|
4
of the den-
tal water jet
|
12
so that it clicks into
place.
• To remove it, hold down the release but-
ton
|
5
and carefully pull the nozzle at-
tachment
|
2
upwards.
NOTE:
it is advisable to replace the nozzle
attachments
|
2
every 12 months (see “Order-
ing accessories” on page 11).
8. Operation
CAUTION:
~
In the first few days of use of a dental
water jet, some users may experience
slight gum bleeding. If the bleeding lasts
longer than 14 days, a dentist should
be consulted. Please also note the re-
marks on the water jet intensity (see
“Setting the water jet intensity” on
page 8).
~
If you suffer from severe periodontitis,
have injuries or ulcers in the oral muco-
sa or have had dental surgery during
the last two months, please consult a
dentist before using the dental water
jet.
8.1 Filling the water tank
You can fill the water tank with water without
removing it from the device.
WARNING! Risk of material dam-
age!
~
Use only clean tap water without addi-
tives to fill the water tank. Additives
(such as mouthwashes) or other liquids
can damage the device.
~
The water should have a pleasant tem-
perature. Do not use water that is hotter
than 40 °C.
1. Hold the switched-off dental water
jet
|
12
horizontally.
2.
Figure B:
open the cover over the fill-
ing opening
|
18
.
3. Fill the water tank
|
19
through the filling
opening
|
18
.
4. Close the cover over the filling open-
ing
|
18
.
__291789_Munddusche_B6.book Seite 7 Montag, 9. Oktober 2017 4:50 16
