![Silvercrest MONSIEUR CUISINE SKMH 1100 A1 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/silvercrest/monsieur-cuisine-skmh-1100-a1/monsieur-cuisine-skmh-1100-a1_operating-instructions-manual_386965013.webp)
11
assembly
20
constitutes the seal for the
bottom of the jug
6
.
Warning!
Remember that the
blades of the assembly
20
are
extremely sharp. Never touch them
with your bare hands to avoid
cutting yourself.
Here is how to remove the blade
assembly
20
:
1. Lay the blender jug
6
on its side.
2. Press the unlock lever on the
underside of the blender jug
6
so that it is pointing at the open
padlock symbol.
3. Carefully remove the blade
assembly
20
.
Here is how to insert the blade
assembly
20
:
4. Lay the blender jug
6
on its side.
5. Insert the blade assembly
20
from the
inside. Note that the two protrusions on
the base of the blade assembly
20
have
to be inserted into the two holes in the
base of the blender jug
6
.
Caution!
Make sure that the rubber
seal
19
of the blade assembly
20
is
correctly seated, otherwise the contents are
liable to leak out.
6. To lock the blade assembly
20
,
press the unlock lever on the
underside of the blender jug
6
so that it is pointing at the
closed padlock symbol.
Note:
Cut large pieces into smaller ones
with an edge length of about 3 – 4 cm.
Pieces larger than this may get jammed in
the blades.
7.3 Positioning the blender jug
1. Position the blender jug
6
in its
receptacle
14
.
2. Press the blender jug
6
down slightly
until it meshes with the drive gear.
Notes:
– If the gears do not line up and you are
unable to press the blender jug
6
down, you may need to wriggle it
slightly to get the gears of the jug
6
to
slide into the receptacle
14
.
– If the blender jug
6
is not positioned
correctly, a safety mechanism will
prevent the appliance from operating.
7.4 Inserting and removing the mixer
attachment
The mixer attachment
22
is placed on the
blade assembly
20
:
— It must be possible to completely
position the mixer attachment
22
without encountering any resistance. If
this proves not to be the case, rotate the
mixer attachment
22
through 90° and
position it afresh;
— The fins of the mixer attachment
22
are
accommodated in the spaces between
the blades;
Caution!
• The mixer attachment
22
may be used
only at speeds 1 to 4.
RP114279 Küchenmaschine mit Heizung LB4 Seite 11 Mittwoch, 18. Februar 2015 2:47 14