24 GB
11.2 Preparation of the
steamer inserts
1. Place the blender jug
5
into the sock-
et
9
.
2. Fill 1 litre of water into the blender
jug
5
. This corresponds with the second
marking from the bottom (
I
).
3. Check that the seal
4
of the deep steam-
er basket
3
has been placed correctly.
4. Put the deep steamer basket
3
slightly
twisted onto the blender jug
5
.
5. Turn the deep steamer basket
3
so that
it locks clearly into place.
The device can only be started when the
steamer basket
3
is put on correctly.
NOTES:
• If the steamer basket
3
has
not been put on correctly, the
symbol shown here on the
right will appear on the dis-
play
27
.
• In order to facilitate the attaching of the
steamer attachment
3
somewhat, put a
few drops of oil on a cloth and rub it on
the seal
4
.
6. Fill food into the steamer baskets
3
and
(if required)
2
.
NOTE:
even if you only need the shallow
steamer basket
2
, always both steamer bas-
kets
3
and
2
must be inserted, so that no
steam can escape to the side.
7. Place the filled steamer basket
2
on
steamer basket
3
.
8. Close the steamer baskets with the lid
for the steamer baskets
1
.
11.3 Starting the steaming
process
1. Use the main switch
6
to switch on the
device.
2. Press the button
23
. The button
23
lights up and the programme
values are shown on the display
27
.
3. Press the button
START/STOP
19
. A
heat-up time of 10 minutes is started.
During this time
- there is no countdown of the time on
the display
27
;
- the button
23
flashes;
- the timer
26
can be used to change
the preset time;
- the LED
15
is lit, and the automatic
lock is activated.
4. After 10 minutes elapsed, a short signal
sounds. The button
23
lights up.
I
__317553_MC_plus_GR_CY.book Seite 24 Freitag, 12. April 2019 10:00 10
