32 GB
16. Malfunctions, Cause, Remedy
If your device fails to function as required, please try this checklist first. Perhaps there is only
a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
~
Do not attempt to repair the device yourself under any circumstances.
16.1 Malfunctions during operation
Malfunction
Cause
Remedy
Device does not start.
Blender jug
5
is not posi-
tioned correctly
Insert blender jug
5
correctly (see
“Insert blender jug” on page 20).
Lid
34
or deep steamer bas-
ket
3
have not been placed
correctly onto the blender
jug
5
.
Place lid
34
or deep steamer bas-
ket
3
correctly.
No power supply
Check mains plug
7
, main
switch
6
and possibly the fuse.
Blade assembly
29
not
turning.
Is the blade socket
10
worn
out? This can happen, for ex-
ample, if you have processed
too large a quantity of dough.
Replace the blade socket
10
with
a new one (see “Replacing the
blade socket” on page 31) and
comply with the specified maxi-
mum quantities in future.
Liquid underneath the
device
The blade assembly
29
has
not been inserted correctly so
that the blender jug
5
is leak-
ing.
Insert blade assembly
29
correctly
(see “Using and removing the
blade assembly” on page 19).
Seal
28
for the blade assem-
bly is defective.
Insert new seal
28
(see “Clean-
ing, checking and replacing seals”
on page 29).
Liquid escaped from the
blender jug
5
flowing onto
the surface through the over-
flow hole
11
of the base
unit
13
. (see “Overflow” on
page 18)
When mixing liquids at speed 10
or with button
TURBO
20
, the
blender jug
5
must not contain
more than 1 litre, since otherwise
liquid may be ejected. For speed
settings of less than 10, the blend-
er jug
5
may only be filled up to a
maximum of 2.2 litres.
__317553_MC_plus_GR_CY.book Seite 32 Freitag, 12. April 2019 10:00 10