- 8 -
• When you have finished,
switch off the blender and re-
move the blender jug
4
by
turning it clockwise.
• Remove the blender lid
2
from the blender jug
4
by
turning it clockwise.
Hints:
• You can add your ingredients to the blender jug
4
through the opening in the lid
2
during ope-
ration. To do so, simply remove the splash protec-
tion cap
1
.
• If you process hot liquids, remove the splash
protection cap
1
to allow the steam to escape.
• Should ingredients be trapped in the blender jug
4
during operation, proceed as follows:
- Switch off the device (speed controller
7
to le-
vel 0) and pull the plug from the socket.
- Remove the splash protection cap
1
and the
lid
2
.
- Remove the trapped ingredients in the blender
jug
4
using the spatula
o
. Ensure you do not
damage the spatula
o
with the blade
z
!
9. Cleaning & Care
Caution:
Never immerse the device in water or other
liquids. There could be potential hazard of
life-threatening electric shock, if moisture en-
ters the voltage conducting parts upon opera-
ting the appliance again.
• Exercise special care when cleaning the blades
z
, the blender jug
4
with installed blade and
the cutting discs (I-VI). The blades and cutting ed-
ges are extremely sharp! Risk of injury!
• Wipe the housing with a clean, damp cloth after
each use.
Warning regarding appliance
damage:
NONE of the appliance components are designed
for cleaning in a dishwashing machine! Additional-
ly, do not use abrasive cleansers for cleaning appli-
ance components.
• You can clean the mixing bowl
9
and the lid
0
in hot soapy water.
• Always remove the plug from the socket before
cleaning the appliance. Otherwise, you are at
risk of receiving an electric shock!
• Clean all appliance components that have come
in contact with foodstuff with detergent and hot
water after use.
• Use an appropriate dishwashing brush for places
that are difficult to access.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 8
