- 56 -
10.OSD menu settings
All possible settings on the DVD player can be administered with the remote
control via the so called OnScreen Display menu (in short "OSD Menu").
The OSD Menu will be superimposed on the television screen.
Before you use the DVD player for the first time for playback of DVDs,
VCDs/S-VCDs or Audio/MP3-CDs you must implement a few settings via the
OSD Menu. These settings are dependent amongst others on...
•
the language, in which you want the OSD Menu to be displayed
•
which TV standard corresponds to the television, to which you want to
connect the DVD player
•
Which image format your television can display
Administering settings via the OSD menu
•
First insert the connector plug of the DVD player's power cord into a
power socket.
•
To switch on the DVD player press the
POWER
button on the front panel of
the DVD player. If the DVD player is already switched on but is in stand-
by mode, press the button
STANDBY
on the remote control to switch the
DVD player on. Standby mode is indicated by the green LED on the
front panel of the device.
The device will check to see if a disc is inserted. The SilverCrest logo appears
on the television screen:
If there is no disc inserted the notice
No disc
appears on the television screen
and
NO DISC
is shown in the display.
•
Firstly please familiarize yourself with the OSD Menu's operation by
means of the following brief introduction.
10.1. Using the OSD Menu
•
To access the DVD players OSD menu press the
SETUP
button on the
remote control.
The OSD Menu with its menu options will appear on the television
screen:
The following menu options can be set:
Sprachen
,
Video
,
Audio
,
Freigabe
and
Diverses
.
•
The control buttons
will move you through the OSD Menu.
To confirm a selection or input press the
OK
button.
•
To exit the selected OSD Menu option press the control button
, until
the left Menu tab (Sprachen, Video etc.) is active. Select another Menu
tab with the control buttons
and activate the OSD Menu option
with the control button
.
•
To exit the OSD menu press the
SETUP
button again.
10.2 Language Settings
You can preset the languages for the
Menü-sprache
,
Untertitel, XviD Unter-
titel, Audio
and
DVD-menü
functions. These settings are valid for every DVD
if the selected language is present on the DVD.
Menü-Sprache:
Here you set the language, in which the OSD Menu will
be displayed on the television screen.
Untertitel:
Here you set the language of the subtitle when the playback
of a DVD is displayed on the television screen (only if the
language is present on the DVD).
XviD-Untertitel:
Here you set the character encoding for the XviD subtitle.
The standard setting is
Westeuropäisch
.
Audio:
Here you set the language, in which the DVD should be
started. Films can then only be played back in the language
that you selected if this language is available on the DVD.
If the selected language is not available the DVD will start
with another language.
DVD Menü:
Here you set the language, in which the DVD Menu will
be displayed on the television screen. Not all films contain
a menu on the DVD. If a menu is available then it can only
be shown in the language that you set if this language is
available on the DVD. If the selected language is not available
then the DVD Menu will be displayed in another language.
