Silvercrest KH 6507, Руководство по эксплуатации

Страница: 19 / 40

• • AUDIO SETUP PAGE• •
19
Ú
Small, if small speakers are connected for the front audio
channels on the audio component.
Center
Select the option ...
Ú
Large, if a large center speaker is connected to the
audio component.
Ú
Small, if a small center speaker is connected to the
audio component.
Ú
Off, if you would like to deactivate the audio channel
for the center speaker or no center speaker is connec-
ted to the audio component
Rear
Select the option ...
Ú
Large, if large rear speakers are connected to the
audio component.
Ú
Small, if small rear speakers are connected to the
audio component.
Ú
Off, if you would like to deactivate the audio channels
for the rear speakers or no rear speakers are connected
to the audio component.
Subwoofer
Select the option ...
Ú
On, if a subwoofer is connected
to the audio component.
Ú
Off, if you would like to deactivate the audio chan-
nel for the subwoofer or no subwoofer is connected
to the audio component.
ô
Note:
If you have selected the option Off under Center, Rear
and Subwoofer, the audio playback takes place only on
two channels (stereo).
9.6.9.2. Configuring the Distances from the
Speaker to the Listener
For an optimal sound experience, the distance from the
speakers to the listern should be configured correctly. If
the distances are configured correctly, the sound from
all speakers should reach the listener position at the
same time. To do this:
1
Measure and record the distances from all speakers
to the listening position.
2
In the Audio Setup Page, select the submenu item Chan-
nel Delay.The following screen is displayed:
SPEAKER SETUP
SPDIF SETUP
DOLBY DIGITAL SETUP
CHANNEL DELAY
CHANNEL TRIM
EQUALIZER
SURROUND
HDCD
CENTER
Fig. 12 Audio setup menü
Enter the distance values for all speakers here. The
distance values to be entered are calculated according
to the following formulas:
Ú
Distance for center speaker = distance of the left/right
front speaker to the listening position - distance of the
center speaker to the listening position
Ú
Distance for the left/right rear speakers = distance
of the left/right front speaker to the listening posi-
tion - distance of the left/right rear speaker to the
listening position
Ú
Distance for subwoofer = distance of the left/right front spea-
ker - distance of the subwoofer to the listening position
3
Press the OK button once. Initially, the center speaker is
selected, as can be seen in the yellow marking on the
screen. Press the left/right control buttons to select the
distance from the center speaker to the listener.You can
set the distance between 0 and 170 cm. Press the OK but-
ton once the correct distance is displayed.
4
Now press the up/down control buttons to select the
additional speakers and the subwoofer. The selected
speaker will be highlighted in yellow on the screen.
Press the OK button once the correct distance is
displayed for each speaker.
9.6.9.3. Setting the Speaker Volume Level
1
In the Audio Setup Page, select the submenu item Channel
Trim.The following screen is displayed:
LEFT
Fig. 13 Adjusting the speaker volume
IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 19