Silvercrest IAN 282774, Руководство по эксплуатации

Страница: 11 / 40

SKBL 56 A1
■ 8 │
GB │ IE │ NI
♦ Press and hold the button for about 2 seconds to turn one
speaker off and deactivate the
Bluetooth ®
function. You will hear a
beep. The operating/charging LED will go out.
NOTE
► If the two speakers are coupled with each other via
Bluetooth ®
, then
both speakers will switch off as soon as you switch off one speaker.
Operating the speakers in mono mode
When supplied, the speakers are preset in mono mode by default. This means
you can pair each speaker with a one playback device. Before you can use
the speakers, you must pair them with a compatible
Bluetooth ®
device.
♦ Make sure that the speakers are switched off and the
Bluetooth
®
device is switched on.
♦ Set the
Bluetooth
® device so that it scans for other
Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating instructions for your
Bluetooth
® device.
♦ Press and hold the button for about 2 seconds to turn a
speaker on and activate the
Bluetooth ®
function. You will hear a beep
and the operating/charging LED flashes alternatively orange and blue.
NOTE
► Make sure that the speakers are no more than 10 metres from the
Bluetooth ®
device and each other. Make sure that there are no
barriers or electronic devices placed between them.
♦ Select SKBL 56 A1 from the list of found devices on your
Bluetooth
®
device to pair the two devices. You will hear a short beep when the
connection has been successfully established. The operating/charging
LED flashes twice every 3 seconds.
♦ If you want to operate the second speaker in mono mode with a different
Bluetooth
® playback device, carry out the process described above
with the second speaker. Make sure you do not switch on the second
speaker until you have paired the first speaker with a
Bluetooth ®
playback device.