- 28 -
• Wait for approx. 15 seconds. The indicator
CLOCK disappears from the display
8
.
The time display is now programmed.
or
• Press the button PROG
6
twice, so that only the
time is to be seen in the display
8
. The time
display is now programmed.
Note:
If the coffee machine is separated from mains power
(or subject to a short power failure), the programmed
time is saved for a maximum of 15 seconds. In the
event of a longer separation from mains power, the
time must be reprogrammed.
Making coffee
Avoid brewing less than 4 cups of coffee. Otherwise,
the coffee will not have the desired temperature
and strength.
• Open the lid
1
and insert a filter bag (Size 1x4)
with folded over sides into the filter holder
2
.
Using the measuring spoon
w
place coffee
powder into the filter bag. Subject to taste, you
will require approx one level measuring spoon
w
of coffee powder per cup. A level measuring
spoon
w
approximates to about 5,5 gr of coffee
powder.
• Fill the water tank
3
with the required amount
of water. For this, use the scale
9
.
Never fill the appliance with water beyond the
max-marking (12 cups).
• Close the lid
1
, ensuring that it engages.
• Place the glass carafe
q
in the coffee machine.
• Press the button ON/AUTO/OFF
7
to start the
brewing process. The red indicator lamp integrated
into the ON/AUTO/OFF button
7
glows.
• When the brewing process is finished you can
remove the glass carafe
q
and serve the coffee.
If you do not wish to serve the coffee immediately,
allow it to stand in the coffee machine.
The keep-warm plate
0
will keep the coffee
warm for 60 minutes. After 60 minutes the coffee
machine switches itself off automatically.
• If you wish to switch the coffee machine off
manually, press the button ON/AUTO/OFF
7
twice so that the integrated blue indicator lamp
glows constantly. After approx. 15 seconds this
extinguishes. The coffee machine is now
switched off.
Note:
Allow the coffee machine to cool down for approx.
5 minutes before commencing a further brewing
process or filling it with water.
Timer-Function
By use of the button PROG
6
you can programme
the coffee machine so that it starts the brewing process
at a pre-determined time. First, ALWAYS place cof-
fee powder in the filter bag in the filter holder
2
and water into the water tank
3
.Place the glass
carafe
q
in the coffee machine. Ensure that the
water tank
3
is not filled beyond the Max. marking
(12 cups).
• Press the button PROG
6
twice, so that TIMER
appears in the display
8
.
• Programme in the desired start time with the button
HOUR
4
and the button MIN
5
(see chapter
"Setting the Time").
• When the desired start time has been programmed
in, press the button ON/AUTO/OFF
7
twice.
The integrated blue indicator lamp blinks and
indicates thereby that the Timer is programmed.
The coffee machine starts the brewing process
at the programmed time.
IB_86115_SKAT1000EDSA1_LB2 21.11.2012 12:02 Uhr Seite 28
