37
SRHG 15 A1
GB
MT
Straightening hair
Prepare the hair as described in "Before straightening".
■
Start with the lower hair pieces at the back of the head. Work over the sides
■
to the front.
Separate a ca. 3 cm wide hair strand.
1)
WARNING - RISK OF BURNS!
Ensure that you do not touch the scalp or other skin on the body with the
►
hot plates
4
.
During the procedure you may only take hold of the appliance by the
►
handle!
Clamp the strand of hair close to the scalp between the hot plates
2)
4
and
press them together.
Draw the entire strand of hair through the hot plates
3)
4
by pulling the hair
straightener downwards.
Repeat the process with each individual strand.
4)
When you have smoothed all of the strands, slide the on/off switch
5)
2
to "0".. The control lamp
3
extinguishes.
Remove the power plug from the wall socket.
6)
Press the hot plates
7)
4
together and slide the restraining device
1
to the
position
.
Safety switch off
This appliance is fi tted with a safety switch-off .
After approx. 30 minutes, and without activation of the on/off switch
2
, the
appliance switches itself off automatically. After approx. 25 minutes the control
lamp
3
starts to blink, to remind you it is about to switch off automatically.
Should you wish to continue using it for longer than 30 minutes, switch the appli-
ance off and then immediately back on. The 30 minutes start from the beginning
again.
NOTICE
The safety switch-off is not intended to replace switching the appliance
►
off manually with the on/off switch
2
! It is only for your safety, should you
forget to switch it off !
IB_71364_SRHG15A1_LB5.indb Abs2:37
IB_71364_SRHG15A1_LB5.indb Abs2:37
13.12.2011 12:00:31 Uhr
13.12.2011 12:00:31 Uhr