INSTRUCTIONS
HOT AIR BRUSH SILKYSMOOTH
PACKAGE CONTENT
•
Hot air brush
•
User manual
TECHNICAL SPECIFICATION
•
Voltage: 220
–
240V
•
Power: 1200W
•
Frequency: 50
–
60Hz
•
Dimensions (
L×W×H)
: 34
×9×14
cm
•
Weight: 737g
•
Plug type: EU
•
Cord length: 2m
•
Airflow temperature: 60
–120°C
•
Applicable hair: dry, wet
FUNCTIONS
(1)
Air brush head
(2)
Ergonomic handle
(3)
Temperature control
(4)
Rotating power switch
(5)
360° swivel cord
(6)
Long nylon comb
(7)
Short bristle comb
OPERATING INSTRUCTIONS
Always ensure that the switch is set to
position 0
(OFF)
before plugging the unit in the power outlet.
Use the high setting for drying hair and use a low
setting for styling.
Should the hairdryer stop working for any reason,
turn it off at once and let it cool down.
Adjust the desired blowing strength:
•
Position 0:
OFF
•
Position I:
COOL function
•
Position II:
HALF power, medium
temperature for gentle drying and styling.
•
Position III:
FULL power, high temperature
for quick drying.
O
IONIC TECHNOLOGY
Negative ions saturate the airflow to reduce the
size of water droplets for faster drying. This helps
condition, smooth and make the hair shinier while
reducing frizz.
O
CERAMIC COATING
Protects the hair during styling with even heat
distribution that penetrates each hair strand
quickly from inside out for less damage.
O
STYLING TIPS
•
For faster results, towel dry hair to remove
excess water, then run a comb through damp
hair to detangle before drying for best
results.
•
Plug the appliance into an electrical outlet
and adjust the switch to the selected setting.
Use the HALF power setting on fine or thin
hair, and the FULL power setting on thick and
coarse hair. Use the COOL function to lock in
the style.
•
Separate hair into manageable sections.
•
For smooth blowouts, place the air brush
close to the roots and brush down towards
