Silvercrest 368342 2101, Руководство по эксплуатации

Страница: 18 / 318

SDBSB 3000 A1
GB │ IE │ 15 ■
5) While ironing, press and hold the steam button
2
to continuously spray
steam from the soleplate
8
onto the items being ironed (see fig. 9).
6) Release the steam button
2
to stop producing steam.
Fig. 9
NOTE
► When you press the steam button
2
, it can take a few seconds until steam
comes out of the soleplate
8
.
7) After ironing, place the iron on the stand
6
of the base station and set the
temperature control
3
to min .
8) Press the On/Off button
e
for about 2 seconds to switch on the appliance.
The On/Off control lamp
r
and the steam control lamp high
z
/
medium
u
/ low
i
(depending on the setting) go out.
9) Pull the plug out of the mains socket.
Vertical steam ironing
1) Hang the piece of fabric you want to iron on a clothes hanger hanging from
a heat-resistant surface.
2) Press the On/Off button
e
to switch on the appliance. The On/Off control
lamp
r
lights up blue and the steam control lamp low
i
flashes blue.
3) Turn the temperature control
3
to the desired ironing temperature. The tem-
perature control
3
must be set within the range to produce steam.
Wait until the heat-up indicator lamp
1
goes out.
4) Press the
+
o
or the
‒
button
p
to set the desired steam strength:
–
If the steam control lamp high
z
lights up, a large quantity of steam is
produced.