Silvercrest 368342 2101, Руководство по эксплуатации

Страница: 17 / 318

SDBSB 3000 A1
■ 14
│
GB
│
IE
4) The heat-up indicator lamp
1
lights up during heating. As soon as the heat-
up indicator lamp
1
goes out, the set temperature has been reached and
you can start ironing.
5) After ironing, place the iron on the stand
6
of the base station. First guide
the tip of the iron under the edge at the front of the stand
6
and then place
the iron completely onto the stand
6
(see fig. 8).
1 1
2 2
Fig. 8
6) Set the temperature control
3
to min .
7) Press the On/Off button
e
for about 2 seconds to switch on the appliance.
The On/Off control lamp
r
and the steam control lamp low
i
go out.
8) Pull the plug out of the mains socket.
Steam ironing
1) Press the On/Off button
e
to switch on the appliance. The On/Off control
lamp
r
lights up blue and the steam control lamp low
i
flashes blue.
2) Turn the temperature control
3
to the desired ironing temperature. The tem-
perature control
3
must be set within the range to produce steam.
3) The heat-up indicator lamp
1
lights up during heating. As soon as the set
temperature has been reached, the heat-up indicator lamp
1
goes out.
4) Press the
+
o
or the
‒
button
p
to set the desired steam strength:
–
If the steam control lamp high
z
lights up, a large quantity of steam is
produced.
–
If the steam control lamp medium
u
lights up, a medium quantity of
steam is produced.
–
If the steam control lamp low
i
lights up, only a small quantity of
steam is produced.
As soon as the steam control lamp high
z
/ medium
u
/ low
i
(depending
on the setting) lights up constantly, you can start steam ironing.