■
12
│
GB
│
IE
SMS 300 A1
Cleaning the HEPA dust filter
Ƈ
After you have removed the HEPA dust filter
4
from the dust container
3
,
place the HEPA dust filter
4
in a plastic bag. Close the plastic bag and
knock the HEPA dust filter
4
out carefully.
Ƈ
Wait until the dust in the plastic bag has settled and then remove the
HEPA dust filter
4
from the plastic bag. Close the plastic bag again and
dispose of it afterwards.
Ƈ
If necessary, you can rinse out the HEPA dust filter
4
with fresh cold or
lukewarm water. Allow the HEPA dust filter
4
to dry out completely.
Ƈ
After cleaning, replace the HEPA dust filter
4
in the dust container
3
so
that it is firmly seated.
Ƈ
Replace the empty dust container
3
with the inserted HEPA dust filter
4
in
the recess for the dust container
3
on the appliance.
NOTE
►
New HEPA dust filters
4
can be reordered from the customer service
(see section
Ordering spare parts
).
Cleaning the UV-C lamp
WARNING! RISK OF INJURY!
►
The UV-C lamp
8
gets hot during use. Allow the UV-C lamp
8
to cool
down sufficiently after use. Otherwise, there is a risk of burns.
Ƈ
Use a screwdriver to loosen the screw on the cover
e
of the UV-C lamp
8
and remove the cover
e
.
Ƈ
Wipe the UV-C lamp
8
with a dry duster.
NOTE
Ƈ
Be careful not to touch the UV-C lamp
8
with your fingers.
Ƈ
Put on the cover
e
and fix it again with the screw.
Changing the UV-C lamp
WARNING! RISK OF INJURY!
►
The UV-C lamp
8
gets hot during use. Allow the UV-C lamp
8
to cool
down sufficiently after use. Otherwise, there is risk of burns.
►
The technical information data for the UV-C lamp
8
can be found in the
section
Technical data
.
Ƈ
Use a screwdriver to loosen the screw on the cover
e
of the UV-C lamp
8
and remove the cover
e
.
Ƈ
Pull the UV-C lamp
8
out of the plug connections.
Ƈ
Insert a new UV-C lamp
8
into the plug connections.
Ƈ
Put on the cover
e
and fix it back in place with the screw.
