Silvercrest 338197 2001, Руководство по эксплуатации

Страница: 11 / 46

SWKS 2400 I1
■ 8
│
GB
│
IE
│
NI
│
CY
Boiling water
RISK – ELECTRICAL SHOCK!
► Never place the electrical base
4
close to water – this would be a
potentially fatal risk!
WARNING – RISK OF INJURY!
► Always use freshly drawn water. Do not consume any water that has already
stood in the kettle for longer than one hour. Do not reboil water that has cooled
down. Always pour old water away. Microbes could have formed in it!
NOTE
► Always ensure that the ON/OFF switch
3
is not pressed down when
the mains plug is unplugged and the appliance is standing on the base
4
.
Otherwise the appliance could heat up unintentionally as soon as the
mains plug is plugged in again.
1) Lift the kettle off of the base when filling it!
2) Press the release button
1
and open the lid.
NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
2
correctly.
3) Fill the jug up to no more than the MAX mark with water.
4) First close the lid, then place the kettle on the base
4
, so that it sits securely
on the base
4
.
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
3
downwards so that it engages.
WARNING – RISK OF INJURY!
► For safety reasons you should not open the lid when the water is boiling or
extremely hot. There is a risk of scalding.
7) The light in the ON/OFF switch
3
shows that the appliance is now heating up.
8) As soon as the water is boiling, the appliance will switch off automatically, the
ON/OFF switch
3
clicks upwards and the light goes out.
INFORMATION
► This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off.
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases first allow the appliance to cool down before using it again.
IB_338197_SWKS2400I1_LB6-.indb 8 28.05.2020 10:53:19