Silvercrest 331378 1910, Инструкции по эксплуатации и безопасности

Страница: 29 / 102

29 GB/IE
Remove the old HEPA filter
5
(see chapter
“Cleaning and storage“).
Insert the new HEPA filter
5
.
Troubleshooting /
problem solving
If the product is not working correctly, the display
1
will show various error codes and emit signal tones
of different lengths. Please refer to the table below
for troubleshooting.
After troubleshooting, press the CLEAN button on the
robot vacuum cleaner
11
or on the remote control
27
.
Problem Possible
cause Trouble-
shooting
No function. Battery is not
fully charged.
Charge the
battery fully.
Power switch
9
switched to
“
O
”.
Switch the
power switch
9
to “
I
”.
Battery contacts
are dirty.
Clean the
charging con-
tacts
3
and
the battery
contacts on
the product.
Poor suction
power.
Suction vent
16
is blocked.
Check the suc-
tion vent
16
.
Dust collector
21
is full or the
filters
5
,
23
are blocked.
Proceed as
described in
the chapter
“Cleaning and
storage”.
Error code Possible
cause
Possible
trouble-
shooting
E01 Left side wheel
does not turn.
Check the left
side wheel
and clean it if
necessary.
E02 Right side wheel
does not turn.
Check the right
side wheel and
clean it if nec-
essary.
Error code Possible
cause
Possible
trouble-
shooting
E04 Product was
lifted up.
Place the
product back
on the floor.
E05 Anti-drop sensor
18
has failed.
Clean the anti-
drop sensor
18
as described
in the chapter
“Cleaning and
storage”.
E06 Anti-collision
sensor
20
has
failed.
Check if the
anti-collision
sensor
20
is
dirty and clean
it if necessary.
E10 Power switch
9
is switched
to “
O
”.
Switch the
power switch
9
to “
I
”.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and