31
GB
7.5 Switching on and off and
adjusting the speed
Use the dial
12
to switch the device on and off and select
the speed setting:
NOTE:
when selecting the speed setting, consult the rec-
ommendation in the tables.
8. Using the blade assembly
DANGER! Risk of injury!
~
The blades of the blade assembly
8
are very sharp.
Do not touch them. When you are not using the blade
assembly, push the blade guard on to the blades.
•
Removing the blade
guard:
Pull the blade guard in the
middle slightly away from the
blade assembly and remove
this by pulling upwards.
•
Attaching the blade
guard:
Place the blade assembly
8
into the blade guard from the
top. Make sure that both
blades are completely pro-
tected.
Application area:
The blade assembly
8
is suitable for chopping onions,
herbs, vegetables, fruit, parmesan and meat. You can also
use the blade assembly to knead dough.
WARNING! Risk of material damage!
~
Do not use the device to chop particularly hard food
such as bones or nutmegs.
~
The blade assembly is not suitable for grain, ice, nuts
or similar types of hard food.
Processing table for chopping:
Processing table for kneading:
WARNING! Risk of material damage!
~
Do not operate the device continuously with the blade
assembly
8
in place for more than 3 minutes. After
this, the device must remain switched off until it has
cooled down to room temperature.
~
The device is unsuitable for heavy dough (e.g. full-
grain bread dough) or large amounts of dough. It is
possible to process sizeable amounts of dough in por-
tions.
Required accessories:
-
Working container
9
-
Blade assembly
8
-
Lid
3
with food pushers
1
,
1
,
2
And this is how it works:
(For assembly see
Figure M
)
1.
Position the working container
9
on the base unit
13
.
Turn the working container slightly in a clockwise di-
rection until it is heard to lock into place.
2.
Place the blade assembly
8
into the working contain-
er
9
.
3.
Fill the ingredients into the working container
9
. Fur-
ther ingredients can be added at a later time through
the food chute.
4.
Place the lid
3
with the food pushers
1
,
1
,
2
onto the
working container
9
. Turn the lid slightly in a clock-
wise direction until it is heard to lock into place.
5.
Connect the mains plug
10
to a wall socket.
6.
Use the dial
12
to select the desired speed setting.
Switch
position
Function
P
Pulse function:
-
Hold the dial
12
in the
P
position to
switch on the device.
-
Release the dial
12
to switch off the
device.
-
Enables working with several brief
pulses in a row – recommended e.g.
for herbs and onions
0
Turned off
1
Speed setting 1 (normal)
2
Speed setting 2 (high)
Ingredients
Preparation
max.
quantity
Processing
time
Switch
Meat
cutting into
cubes,
approx.
2 x 2 cm
500 g
approx.
30 - 60 sec.
2 / P
Onions
quartered,
without peel
500 g
approx.
30 - 60 sec.
P
Garlic
without peel
500 g
approx.
30 - 60 sec.
P
Carrots
cutting into
pieces,
approx.
2 x 2 cm
500 g
approx.
30 - 60 sec.
2 / P
Ingredients
max. quantity
Processing time
Switch
Yeast dough max. 500 g of flour approx. 3 min.
1
__326488_Kuechenmaschine Multi_B8.book Seite 31 Dienstag, 6. August 2019 10:40 10