Silvercrest 315282, Руководство по эксплуатации

Страница: 25 / 96

23
GB
4. Place a paper filter (size 1x4) with fold-
ed sides in the filter holder | 11. When it
is folded, the paper filter fits better in
the filter holder
| 11 and the seams are
prevented from tearing.
5. Place coffee grounds into the filter. For
medium-strength coffee, put one coffee
spoon (around 7 – 8
| g) of coffee pow-
der per cup into the filter. Use ground
coffee powder for filter coffee. If you
grind the coffee yourself, grind it on a
medium fineness level.
6. Close the lid | 1 of the coffee machine | 6.
7. It is very important to screw the
lid | 9 on the thermal jug | 8.
The lid | 9 is closed by turning it clock-
wise.
8. Place the thermal jug | 8 in the
coffee machine | 6.
9. Press | 18. The red LED | 19 lights up
and the brewing process will start after
a short time.
10.The red LED | 19 goes off approx.
5 – 6 minutes after the end of the brew-
ing process.
11. Figure B: take the thermal jug | 8 by the
handle out of the coffee machine | 6,
open the lid | 9 slightly (by turning anti-
clockwise) and pour out the coffee.
12. Figure C: close the lid | 9 again (by
turning clockwise) to keep the coffee
hot.
NOTE: the brewing process can be stopped
by pressing the button | 18. Press the but-
ton | 18 repeatedly until all LEDs have
gone off.
7.4 Starting with the timer
Enter the desired time if the timer shall start
the coffee machine at a certain time.
NOTE: the timer cannot be set if a brewing
process has already started (i.e. if the red
LED
| 19 is lit).
The timer can be set up to 24 hours in ad-
vance.
1. Connect the coffee machine | 6 with the
mains plug | 7 to a wall socket.
2. Fill the coffee machine as usual with cof-
fee powder and water.
3. Close the lid | 1 of the coffee machine | 6.
4. It is very important to screw the
lid | 9 on the thermal jug | 8.
The lid | 9 is closed by turning it clock-
wise.
5. Place the thermal jug | 8 in the coffee
machine | 6.
6. Press the button
|
15 repeatedly until
TIMER appears at the top in the dis-
play | 13.
7. Press HOUR | 17 in order to set the
hours. Keep the button pressed to run
through the options quickly.
8. Press MIN | 16 in order to set the min-
utes. Keep the button pressed to run
through the options quickly.
9. Press | 18 twice . The white LED | 14
lights up. This indicates that the timer is
active.
10.At the time that has been set, the brew-
ing process will start automatically and
the red LED
| 19 will light up.
11.The red LED | 19 goes off approx.
5 – 6 minutes after the end of the brew-
ing process.
NOTE: you can stop the timer by pressing
the | 18 button. Press | 18 once while
the white LED | 14 is lit. All LEDs are off.