■
40
│
GB
│
IE
SKF 2800 B3
6) Clean the control/heating element
with a damp cloth. If necessary, add a
little mild detergent to the cloth. Wipe this off afterwards using a damp cloth
so that all detergent residue is removed. Dry the control/heating element
thoroughly.
NOTE
–
If you want to clean the permanent metal filter
inside the appliance
lid
.
, place the appliance lid
.
in warm water with a mild washing-up
liquid.
–
Leave it for a moment to soak and sway it back and forth.
–
Then rinse the appliance lid
.
with clear water.
–
Dry it and place it upright on its side so that any excess water still
inside the appliance lid
.
can drain away.
–
Dry it again and make sure that there is no water remaining under the
rubber lip on the bottom of the appliance lid
.
. If necessary, lift the
rubber lip to dry it.
Make sure that the appliance lid
.
is completely dry before using it
again!
7) Dry all parts well before Assembly.
8) Reassemble the deep fat fryer in the reverse order.
Storage
1) Lift or carry the appliance using the recessed grips
on each side of the
housing.
2) Wrap the power cable around the cable spool
on the rear of the appliance.
Push one of the pins of the mains plug into one of the holes on the cable spool
to hold the mains plug in place.
3) Store the appliance with the appliance lid
.
closed. This will keep the
inside of the deep fat fryer clean and free of dust.
Содержание 300405
Страница 3: ... 3 0 ...