55
GB/MT
Before first use
The following transportation locks are
attached to the product:
¾
¾
Transport safety lock
2
for securing the
turntable
12
.
¾
¾
Head-shell
9
for pick-up system
8
.
¾
¾
Remove all packaging material and all
transport locks from the product .
¾
¾
Unlocking turntable transport lock
of the turntable
12
:
Turn the transport
safety lock
2
in clockwise direction until a
light resistance can be felt . Then the transport
security is unlocked .
¾
¾
Remove the head-shell
9
from the pick-up
system
8
.
¾
¾
Transport safety lock
2
and head-shell
9
must be installed on the product prior to longer
transports .
Initial use
Connecting the product to an
external amplifier
¾
¾
Plug the cinch cable
22
into the Line Out
output
21
. Ensure that every jack is plugged
in according to the correct colour (red and
white) .
¾
¾
Plug the other end of the cinch cable
22
into
the Line In socket of your amplifier . Music that
is played using the product will now be played
through the external amplifier in addition to
through the built in speaker
13
.
ATTENTION
¾
¾
Do not use the phono connector of your
amplifier to connect the record player . This
might cause damage to your amplifier and
record player .
Connecting the product to
electricity supply
When connecting the product to the electricity
supply, please consider the following tips to ensure
that the product works safely and correctly:
¾
¾
Before you connect the product, compare the
connection data (voltage and frequency) on
the type plate of the power supply
(model: YeS12W-0900100VS) with that of
your electricity network . These data must
correspond, otherwise damage may be caused
to the product .
¾
¾
Make sure that the connection cable is
undamaged and does not pass over hot
surfaces and / or sharp edges .
¾
¾
Make sure that the connection cable is not taut
to avoid tripping hazards .
¾
¾
Connect the barrel jack of the power supply
with the to the DC input jack
17
.
¾
¾
Plug power supply into a well-reachable power
outlet .
Turning the product on and off
¾
¾
Turn the record player
14
on using the POWER
button
16
.
¾
¾
Adjust the volume using the volume control
10
.
To raise the volume, turn the volume control
10
clockwise . To lower the volume, turn the volume
control
10
anti-clockwise .
