■
6
│
GB
STGG 1800 A2
Assembly and setting up
WARNING! RISK OF FIRE!
►
Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other flammable objects.
►
Set up the appliance at least 70 cm from any
flammable materials (e.g. curtains).
►
Always place the appliance on a heat-resistant
surface.
►
Set up the appliance with its rear side directly
against the wall. When doing so, ensure that
the wall is made of heat-resistant material
and that the lid
can open fully.
1) Remove all of the parts from the box and
remove the packaging material and any
protective film.
2) Clean all components as described in Chapter
“Cleaning and care”. Ensure that all parts are
completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface.
4) Place the drip tray
in the frame
so that
it sits in the recess to the left of the centre.
ATTENTION! DAMAGE TO PROPERTY!
►
Never use the appliance without the drip
tray
! Otherwise hot fat and other hot
liquids will drip down from the appliance
onto the surface below.
5) Place the griddle
onto the frame
.
Ensure that the socket
is on the right side.
The griddle
must sit correctly in the frame
otherwise the thermostat
cannot be con-
nected to the socket
.
6) Push the hinges of the lid
into the recess on
the frame
and close the lid
.
7) Connect the thermostat
with the socket
on the appliance. Ensure that the thermostat
is
pushed up to the stop in the socket
. Otherwise
the appliance cannot heat up!
Before first use
1) Open the lid
by pushing up the catch on
the handle
and, at the same time, pulling
the lid
upwards.
Open the lid
until the hinges slide down
into the hinge guides
and the lid
is firmly
in place.
2) Wipe the griddle
with a moist cloth.
3) Close the lid
by lifting it lightly into the
hinge guide
so that it can be folded shut.
4) Insert the plug in a mains power socket and
set the temperature control
to level 5. The
appliance will heat up.
5) Wait for 10 minutes.
6) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
►
The first time the appliance heats up, a small
amount of smoke and smell may be generated
due to production-related residues. This is
completely normal and is not dangerous.
Provide sufficient ventilation by opening a
window, for example.
7) Wipe the griddle
with a damp cloth after
cooling.
8) Clean the drip tray
as described in Chapter
“Cleaning and care”.
9) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.
Содержание 281292
