Silvercrest 279238, Инструкция по эксплуатации и правила безопасности

Страница: 81 / 114

■ 78 │ GB │ MT SKR 800 B2
Handling and use
Making basic settings
Requirement:
The device is in clock/standby mode.
NOTE
► If there is a suitably strong RDS signal (radio data system), the time and
date will be set automatically. Neither an adjustment of summer/winter time
is made automatically by the RDS nor does the station name appear on the
display .
► Make the settings quickly. If you do not press a button for 15 seconds, the
entry is cancelled. All settings made up to this point are saved automatically.
♦ Press the button for about 2 seconds. The symbol for the 24-hour
format ( ) flashes on the display.
♦ Turn the
−TIMER+
dial to switch between 24-hour ( ) and 12-hour
format ( ).
NOTE
► If the 12-hour format ( ) is set,
PM
appears in the upper left of the display
from 12:00 PM until 11:59 PM. From 12:00 AM to 11:59 AM, nothing
appears on the display.
♦ Press the button to accept the setting. The hours flash on the display.
♦ Turn the
−TIMER+
dial left or right to set the hours.
♦ Press the button to accept the setting. The minutes flash on the display.
♦ Turn the
−TIMER+
dial left or right to set the minutes.
♦ Press the button to accept the setting. The year flashes on the display.
♦ Turn the
−TIMER+
dial left or right to set the year.
♦ Press the button to accept the setting. The month flashes on the display.
♦ Turn the
−TIMER+
dial left or right to set the month.
♦ Press the button to accept the setting. The date flashes on the display.
♦ Turn the
−TIMER+
dial left or right to set the date.
♦ Press the button to accept the setting. (RDS (radio data system))
flashes on the display.
♦ Turn the
−TIMER+
dial left or right to turn the RDS function (On) or
(Off). When the RDS function is turned on the signal is strong enough, the
time and date is corrected automatically if necessary.