■
4
│
GB
│
CY
SMH 30 A1
Assembly
Preparing for assembly
DANGER! ELECTRIC SHOCK!
►
Ensure that there are no electrical cables, water or gas pipes or other lines
in the wall at the mounting location.
CAUTION – PROPERTY DAMAGE
►
Before installation, check the suitability of the intended wall for supporting
the weight to be mounted.
►
Note that the supplied wall plugs are only suitable for concrete and brick
walls. If you are unsure about the suitability of your wall, please consult an
expert.
NOTE
►
Allow plenty of time for the assembly of the product.
►
Remove the individual parts from the packaging and place them within
easy reach.
Required tools
Pencil
Spirit level
Drill
Drill bit Ø 10 mm
Phillips screwdriver
Open-ended spanner SW 13 mm
Allen key 3 x 3 mm (supplied)