Silvercrest 113894, Руководство по эксплуатации

Страница: 52 / 58

50
GB
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device will now receive the device identifica-
tion "SBLS6A1".
4. Establish a connection to the Bluetooth speaker on the audio de-
vice. Both devices are now interconnected. The LED 3 on the de-
vice flashes blue and an acoustic signal sounds.
NOTE: it is possible that audio devices remember the identification
of the device. Thus it is possible that a new manual connection estab-
lishment is not required while the Bluetooth function is active.
5. Now play a song on the audio device. The sound is reproduced
via the loudspeakers 5 .
7.2 Accepting calls
If the device is connected to a smartphone it is possible for you to
accept calls. The ring tone is reproduced via the loudspeakers
5 and
the music stops playing.
NOTES:
• For some mobile phones you have to choose Bluetooth as audio
source when accepting a call.
• It is possible, that not all of the functions will be supported by all
mobile phones.
1. Press the button 2 to accept the call.
2. Adjust the volume during the telephone call using the buttons
1
/
4
.
3. Short press the button 2 during the telephone call to end the
call. If you have accepted the call while the music was playing,
the song will continue to be played after ending the call.
7.3 Playing music using the cable
NOTE: if there is a device connected via a cable, this connection has
priority over the Bluetooth connection. A possibly existing Bluetooth
connection will be interrupted. Phone calls can no longer be made
wireless.
1. Plug the TRS connector of the 3.5 mm stereo jack cable 10 into
the headphone socket of the sound source (e.g. MP3 player, tele-
phone) and the socket
AUX8 on the device.
2. Switch on the sound source.
3. Switch on the device using the
ON/OFF 9 switch. The LED 3 is lit
green. An acoustic signal sounds. Then the LED 3 flashes green.
BB58B%OXHWRRWKB6SHDNHUB[:B%ERRN6HLWH'RQQHUVWDJ-XOL