Silvercrest 113894, Руководство по эксплуатации

Страница: 51 / 58

49
GB
LED indicators
NOTE: the function indicators can also be combined.
Example: the LED indicator is lit red and flashes in blue, if a Bluetooth
connection is established while charging.
7.1 Establishing a Bluetooth connection
NOTES:
• The identification of the device is "SBLS6A1".
• After turning it on, the device automatically tries to reconnect to
the last paired device or to establish a new connection.
• Please observe that the establishment process of the connection
may vary slightly depending on the device and the software
used.
• The device switches itself off, …
… if no Bluetooth connection is established within 10 minutes or
… if it does not receive a signal for 10 minutes.
• If the device has switched off automatically, first switch it off by
means of the ON/OFF 9 switch before being able to switch it
back on again.
• Depending on e.g. the volume, the device may be used for a peri-
od of approx. 10 hours while the Bluetooth connection is estab-
lished.
1. If necessary, remove the plug of the 3.5 mm stereo jack cable 10
from the socket AUX 8 .
2. Switch on the device using the ON/OFF 9 switch. The LED 3 is
lit green. An acoustic signal sounds. Then the LED
3
flashes
blue/red.
LED indicator 3 Function
LED flashes
blue/red
• Device attempts to make a connection to
the most recently paired device
• Device sends device identification
LED flashes blue Bluetooth connection is established
LED flashes green
Connector of the 3.5 mm stereo jack
cable
10 is plugged into the AUX 8 jack
socket
LED flashes red The battery must be charged
LED is lit red The battery is being charged
BB58B%OXHWRRWKB6SHDNHUB[:B%ERRN6HLWH'RQQHUVWDJ-XOL