9
SILVERBAC WOOD PELLET GRILL
OPERATION MANUAL
FIG 9
38
47
5
54
54
53
53
ASSEMBLY
(cont.)
STEP 5 – Positioning the Door Handle
Align the holes in the Left Door (38) with the holes in the Handle (47). Place a (Ø18*Ø6.5*2.0mm)
Washer (54) on each ¼-20* ½ Hexagon Bolt (53) and tighten with Wrench. Repeat the former step to
assemble the Right Door (46). As shown in FIG 9.
STEP 6 – Positioning the Door
1. Take the Right Door (46) with handle assemble. First insert the Bottom Pivot (37) into the small hole on Platform
(50). Then pull down the pivot until the upper end is aligned with top edge of the door. Then align the pivot
with the upper hole and pull up the pivot secure the door.
2. Repeat Step 1 to secure the Left Door (38). Make a proper adjustment until the doors can be firmly closed. As
shown in FIG10.
STEP 7 – Positioning the Heat Baffle
Position the Heat Baffle (5) on the locating brackets, which is on the inside walls of the grill. The notched legs should be
facing downward. Move to the right to lock. As shown in FIG 11, FIG 12.
FIG 11
FIG 12
FIG 10
50
37
45
46
56
