Now you can use the needle threader to pull the
thread loop through to the rear.
Place the needle threader against the front groove of
the needle. Move down as far as the eye of the
needle and press the threader gently against the
needle. This causes a small metal pin to pass
through the eye and the needle is threaded
automatically.
Please Note:
If you press too hard,the small
metal pin will bend and you will no longer be able
to use the threader to thread the needle.
Raise the needles into their highest position and
lower the presser foot. Place the thread running from
right to left in notch A of the needle threader (the
needle threader is included in the accessory box).
One of the two triangles must be pointing upwards.
21
Needle threader
Turn off at the power switch
A