Silver 5 Thread Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 48

Silver 5 Thread Скачать руководство пользователя страница 14

Attention:

Consult a qualified electrician if in doubt as how to connect the machine to

the power source. Unplug the power cord when the machine is not in use.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by 4C-316B (110-120V area) / 4C-

326G (220-240V area).

With the sewing machine turned off, insert the foot

control plug into its connector on the sewing machine.

Turn on the sewing machine, and then slowly

depress the foot control to start sewing.

Release the foot control to stop the sewing machine.

Foot control

The preset presser foot pressure on the machine is

suitable for medium fabrics. For most fabrics, the

presser foot pressure does not need to be altered. If

you intend to workwith lighter or heavier fabrics,

however, it may be necessary to reset the pressure.

In this case, you can choose from six positions; make

your selection with the presser foot pressure

adjustment knob. The standard setting is N .

Lower the presser foot before

turning the presser foot pressure adjustment knob.
This makes the knob easier to turn.

Please Note:

12

Starting sewing

Adjusting presser foot pressure

«
...
12
13
14
15
16
...
»

Содержание 5 Thread

















































Отзывы:

Нет отзывов