Silver Star NEPTUNE 700 PROFILE, Руководство пользователя

Страница: 11 / 17

9
FRAMING3.L 0-255
FRAMING3.R 0-255
FRAMING4.L 0-255
FRAMING4.R 0-255
FRAMING ROT 0-255
DIMMER 0-255
STROBE 0-255
DEBUG HIDE
NO Factory testing mode. All stepper motors
are not controlled by signal, It only works
again after the reset.
YES
RESET
ALL RESET Select Yes/No to carry out all reset
PT RESET Select Yes/No to carry out P/T reset
COLOR SYSTEM
COLOR/CMYK reset
FRAMING RESET
Framing RESET
OTHER Zoom/ Focus/ Prism reset
INFO
FIXTURE HOURS Hours of fixture use
LED USE HOURS LED use time
TEMPERATURE LED temperature
VERSION Software versions
NETWORK Check network parameter
RDM
UID 0x388Axxxxxxxx Check fixture's ID
LABEL NEPTUNE 700 PROFILE Check fixture's LABEL
SYSTEM
ERROR
MEMORY IC Memory IC
ANGLESENSOR Angle Sensor
PAN SENSOR Pan Sensor
PAN ENCODER Pan Encoder
PAN DRIVEIC Pan Drive IC
TILT SENSOR Tilt Sensor
TILT ENCODER Tilt Encoder
TILT DRIVEIC Tilt Drive IC
TEMPERATURE Temperature
CMY_C RESET CMY C Reset
CMY_M RESET CMY M Reset
CMY_Y RESET CMY Y Reset
CTO CTO Reset
COLOR RESET Color Reset
FGOBO RESET Fixed Gobo Reset
GOBO RESET Gobo Reset
RGOBO RESET Rotate Gobo Reset
ANIMATION RESET Animation Reset
Z00M RESET Zoom Reset
FOCUS RESET Focus Reset
PRISM RESET Prism Reset
FROST RESET Frost Reset
FRAMING Framing Reset
SERVICE **** PAN ±127 Pan position fine adjustment