Printed in USA 10/13 © 2013
4
36948-EN
3-Product Dairy Dispenser
Model SKBD3LS
P
RINCE
C
ASTLE
LLC
W O R L D W I D E
Unpacking and Setup
Inspect for shipping damage.
Examine the shipping
container immediately upon receipt. Any damage to the
container or equipment due to shipping should be
reported to the transportation company immediately.
Claims should be filed within 24 hours. Shipping
damage is not the responsibility of Prince Castle nor its
Silver King division.
1
Unpack the unit.
Take care with box cutters or other
sharp instruments not to nick the equipment when
opening the shipping container.
Carefully remove the unit from the shipping box. Be
sure to follow any orientation or caution labels on the
box.
2
Plan the unit’s location.
When locating this unit,
convenience and accessibility are important
considerations, but the following factors must be
observed:
• Proximity to a 3-prong 110 VAC receptacle for
grounding (see Step 4).
• The unit must be operated with the legs in place, so
sufficient overhead must be provided. The top of the
unit must be clear of obstruction. No clearance is
required on the sides or back of the unit.
• This unit operates best at ambient temperatures
between 32°F (0°C) and 78°F (26°C).
The unit may be located in the drive-through area, on
the front counter, or in the drink area as desired.
3
Meet electrical requirements.
Prior to connecting the
unit to power, be sure to check the data plate located on
the end panel of the cabinet for required voltage. The
specifications on the data plate supersede any
information contained in this manual.
The standard unit is equipped with a seven (7) foot
power cord extending from the bottom of the unit. The
unit requires a 115 Volt, 60 Cycle, 1 Phase, properly
grounded electrical receptacle, protected with a 15 or
20 ampere fuse or breaker.
The power cord comes with a 3-prong plug for
grounding purposes. Any attempt to cut off this
grounding spike or to connect to an ungrounded
adapter plug could result in serious injury, will
void the warranty and terminate the
manufacturer’s responsibility.
WARNING
4
