background image

 

 

Before attempting to operate or install the sprayer carefully read and take note of the following 
safety warnings. 

  

Failure to comply with these warnings may result in serious injury or death. 

 

You need to read carefully and take note of the following warnings before attempting to operate or install this sprayer. Failure to 
comply with these warnings may result in serious injury or death. 

 

Warning !  

This sprayer is designed and manufactured solely for the purpose of applying agricultural chemicals to plants. Under 

no circumstances may it be used for any other purposes. 

Warning !  

Prior to sprayer usage all users and operators must have read and fully understand the contents of this  manual 

Warning !  

Do not exceed the the vehicle manufacturer’s specified safe load and carrying capacity. 

Warning !  

Exercise extreme care when operating in hilly or uneven terrain to ensure proper stability. Refer also to the vehicle 

manufacturer’s operating and safety instructions 

Warning !  

Refer to the chemical manufacturer’s label for correct use and safe handling instructions of chemicals before use 

Warning !  

Never allow inadequately trained personnel to attach or operate the implement 

Warning !  

Before carrying out maintenance work, wash the sprayer thoroughly to remove all toxic chemicals that may 

contaminate the sprayer. 

Warning !  

Do not point spray gun at any part of the human body. 

Warning !  

Do not pump flamable liquids or operate the pump in an explosive environment. 

Warning !  

Ensure the  operators power supply and cabling is suitable to support the pumps maximum current draw and voltage 

requirements. Inappropriate power supplies  

Warning ! 

 Do not over extend power cables and or use cables of insufficent current capacity as this can cause voltage 

restrictions and excessive currents that can damage equipment. 

 

The following “Safety” decal should be fitted to the machine at all times in the location shown in the diagram. If the decal is 
missing or unreadable it should be replaced byordering a new decal from your Silvan dealer by the part number shown.  

P/No  DEC90 

Safety Instructions 

Содержание Squatpak 300L









Отзывы: