MAINTENANCE
FOR BEST RESULTS AND LONG TERM OPERATION REGULAR
MAINTENANCE IS ESSENTIAL
.
To ensure the cooler delivers fresh and clean air, regularly change the
water when dirty, and clean both the dust filter and the cooling pad.
1)
To access the filter pads disconnect the INLET PROTECTIVE GRILL at
the back of the cooler by unscrewing the screws on the grill. Lift the grill
and lift out. Remove main cooling pad from grill. To replace the pad, slide
back into grill and replace. Side cooling pads can be accessed when the
rear grill has been removed.
2) Clean the pad from the inner-side to out-side of pad (inner side is towards
motor). Never use any liquid detergent. Never use pressurized water, as it
may cause damage to the pad.
3)
Unscrew the drainage lid to let dirty water flow out, then clean the water
tank thoroughly with a soft cloth. Wash off dirt on the water sensor, water
pump and the float valve. Rinse thoroughly.
4) Use mild soap and soft clean cloth when cleaning the cooler casing. Do not
use any caustic chemical detergent that may cause damage to the surface of
the cooler.
5
）
To prevent buildup of algae and biological organisms in the reservoir,
regularly add chlorine/bromine tablets as per tablet manufacturer
recommendation for evaporative cooler reservoirs.