OPERATION INSTRUCTION
Before attempting to operate or install this unit carefully read
and take note of the following safety warnings.
Failure to comply with these warnings may result in serious
injury or death.
Keypad
Instruction
Comment
ON/OFF
This turns the cooler on or off.
COOL
This activates the cooling function. Note that there is a
delay of 1 minute while the cooling pads are wetted before
cooling can begin.
If cooling is not active unit can operate as fan
WIND SPEED
Pressing SPEED will select low, medium or high fan speed.
SWING
This activates/deactivates swing function.
TIMER
Delayed start
The timer setting can be used to start the cooler after a
certain number of hours delay. When only the green
POWER light is on, press TIMER until the number of hours
delay (1-24) is shown. When screen 00 indicated timer is
cancelled.
TIMER
Automatic stop
When the cooler is already going, press timer to set the
number of hours (1-24) until the machine will automatically
switch off. When screen 00 indicated timer is cancelled.
WATER
SUPPLY
Use only clean, fresh water.
Pour water into the water inlet on the right hand side of the
unit (Do not overfill beyond max capacity). Alternatively,
attach a hose to the water inlet on the left side for automatic
filling. Note a pressure reducing valve is recommended for
high pressure water supplies.
1. All electrical repairs must only be carried out by a suitably qualified
electrician, after all power is disconnected.
2. This cooler is not intended for use by children or persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge.
3. Children should be supervised to ensure that they do not play with the
appliance.