IMPORTANT REMINDERS
Please read the manual carefully before operating the cooler.
A)
Operating conditions:
1- Temperature: 18°C to 45°C; Water Temperature: < 45°C.
2- Power supply must not exceed the required voltage (+/-) 5%.
3- Air supply must be largely free of dust or extra cleaning is required.
B)
Protect the power cable from vehicles or foot traffic. Connection to incorrect electric
voltage, or faulty installation, will cause danger of electric shock.
C)
If the product malfunctions at startup, please disconnect from electric power
immediately and refer to dealer for service.
D)
Other tips for cooler use:
1-
Keep doors and windows open to allow fresh air to enter, and treated air to exit, when
cooler is operating.
2-
Flashing red light on the control panel means water level in reservoir is low.
3-
Rinse the reservoir with fresh water and clean prior to use after a period where the
cooler has not been in operation.
4-
Take care when moving the cooler, especially when it is full of water. Pushing too
hard will cause the cooler to overbalance and tip over, which may cause injury and
will damage the cooler.
5-
Only use cooler on level ground.
6-
To prevent build up of algae and other biological organisms in the reservoir, regularly
add chlorine/bromine tablets as per tablet manufacturer recommendation for
evaporative cooler reservoirs.
7-
New cooling pads can expel mild odour and may require several hour of operation
and water exchanged for fresh water.
8-
Dust and dirt can stick to the paper cooling pads. It is recommended to periodically
remove dry cooling pads and gently rinse thoroughly to clean. Allow to dry before re-
fitting. As Cooling pads become older it is recommended to replace to improve
efficiency.