Silva ATLAS, Руководство по эксплуатации

Страница: 55 / 108

55
to activate the Save command.
3. To save data from Atlas to the MMC: press ENT (for S
AVE
.)
4. To accept the default name "Data" for the GPS Data File, press
↓
to
S
AVE
|
ENT
. (If you wish to rename the file, press
ENT
to activate the selection
box. Press
↑
or
↓
to change the first character, then press
→
to the next
character and repeat until the name is correct. Then, press
ENT
|
↓
to
S
AVE
|
ENT
.)
The unit will display first a progress then a completion message when the data
transfer is finished. To return to the Page view, press
EXIT
|
EXIT
|
EXIT
.
Searching
In this example, we'll look for the nearest hotel or motel. For more information
on different types of searches, refer to Section 6, Searching .
NOTE:
This example requires the Point of Interest (POI) database included with a
Map Card™
After Atlas has acquired a position:
1. Press
FIND
|
↓
to
M
AP
P
LACES
|
ENT
|
↓
to
POI-L
ODGING
.
2. You could search the entire lodging category, but in this example we will
narrow our search. Press
→
to
H
OTELS
/M
OTELS
|
ENT | ENT .
3. Atlas says it is calculating, then a list of hotels and motels appears, with the closest at
the top of the list, and the farthest at the bottom of the list. The nearest is highlighted.
Find Map Places Menu, left; Category Selection menu, center; and list of the
nearest motels, right.
4. If you wish, you could scroll
↑
or
↓
here to select another motel or hotel, but for now
we will just accept the nearest one. Press ENT .