- 7 -
Before using the ice maker, it is highly recommended to clean it thor-
oughly.
1. Remove the exterior and interior packaging. Check that the ice basket
and ice scoop are included. If any parts are missing,
please contact
our customer service
.
2. Take out the ice basket and clean it with hot water, detergent and a
non-abrasive sponge.
3. Clean the interior with diluted detergent, warm
water and a soft cloth. Then use the water to rinse
the inside parts, Unplug the water drainage cap on
the bottom of the ice maker to empty the water in
the water tank. If you need to empty the water in
the reservoir, you need to plug the power but not
turn on it, then unplug the water drainage cap to
empty the water.
4. Wipe the outside of the ice maker with a mild
detergent solution and warm water.
5. Dry the interior and exterior of the ice maker with a soft cloth.
CLEANING AND MAINTAINING YOUR ICE MAKER
BEFORE FIRST USE
After using the ice maker for a long time, we also suggest you should
clean it. In particular, you must clean the water separator pipe and the
water filters periodically.
Cleaning the Separator Pipe:
If the compressor and water pump work normally, but there is little or no
water running down from the separator pipe, please remove the separator
pipe to check if it is blocked.
1. Press the ON/OFF button to
turn off the ice maker.
2. Pinch the left end of the
separator pipe and pry it out.
3. Clean each holes on the
separator pipe.
4. Connect the separator pipe
to the hose on the right side,
then clip the left end of the
separator pipe into the slot
on the left side. Please make
sure the holes point to down.
AFTER LONG-TERM USE
Water Drainage Cap
Water Separator
Pipe
